Posted   by 

M96 Swedish Mauser Serial Numbers

  1. 1891 Argentine Mauser Serial Numbers I really like these old rifles, and I already have a hunting rifle chambered in the 6.5x55mm cal. Does anyone have an M96 or an M38 military Mauser?
  2. Markings on Swedish mauser rifles. Text Mats Persson. How to read the markings on the Swedish m/94 Carbine and on the m/96 and m/38 Rifles. Manufacturing The name of the manufacturer and the year of manufacture are on the top of the receiver. The serial number is on the left side of the receiver.
  3. See full list on powerfuldia.netlify.app.

Apr 09, 2008 Swedish Mauser M96 Serial Number 379 If this is. The 3 digit serial number could be a CG 1898 rifle (serial number 1 to 32xx) or Mauser 1900 rifle (serial number 1 to 5000) rifle serial number. At some point in time the receiver did not pass inspection, so it had to be replaced. Thousands of surplus Model 1896 Swedish Mausers were imported into the U.S. During the 1950's and 1960's, introducing large numbers of American hunters to both the 6.5x55 cartridge and the Swedish Mauser service rifle. The m/96 became one of the most desirable surplus rifles.

Powerfuldia.netlify.app


The Swedish Mauser as it is affectionately called got its beginnings in 1896. The Swedish chose the 6.5x55mm cartridge and the 1896 Mauser or M96 as their rifle of choice. The rifle would remain basically unchanged until 1938, when a new shorter model would be introduced known as the M38 Swedish Mauser.

Mauser

While the Germans have always been known for their craftsmanship, the Sweds took craftsmanship to a new level with the Swedish Mauser. They required the guns to be manufactured using Swedish high-grade steel (Swedish Steel) and a mixture of various metals including copper, nickel and vanadium. This process produced exceptional strength and corrosive-resistant properties. It was also claimed to have been made from superior steel than the normal steel of the times. One of the reasons for the high quality of the Swedish Mauser is because Sweden never entered wars like most other nations.

Swedish Mausers were manufactured in Sweden Carl Gustafs stads Gevärsfaktori, in Germany by Waffenfabrik Mauser Oberndorf a/N and by and Husqvarna Vapenfabriks Aktiebolag. The actual production for the Swedish Mauser didn’t really start until 1898, when the Carl Gustafs federal armory started producing them. Due to the tooling up period and slow production, some of these earlier models were also contracted out to be made by Mauser and later by Husqvarna during WWII.

The Swedish Mauser was used by the Finnish army against the Russians (Finnish-Russian War 1939-1940 also called the Winter War). The Fins stamped theirs with the letters “SA” for any Swedish Mauser used during the Russian War. Finland was provided about 77,000 of the M96 Swedish rifles throughout this period, but most of them came near the end of the conflict. There were also about 8,000 Swedish volunteers that arrived armed with the Swedish Mauser M96s.

Overview
Name – 1896 Mauser, M96 or Swedish Mauser
Weight – 9.2 pounds
Length – 49″
Barrel Length – 29″
Ammunition – 6.5 x 55mm
Manufactures – Carl Gustafs Stads, Husqvarna, and Mauser

M96 Swedish Mauser Serial Numbers Manufacture

Sweden eventually replaced the Swedish Mauser with the shorter barrel version (7 inches shorter) called the M38 when in 1938 the new shorter Swedish Mauser rifle was being produced.

One interesting note is each rifle comes with a brass disk fitted to the right side of the rifle stock. The disk gives some insight as to the condition of the weapon.

Swedish

There are 3 distinct pie shape slices. The largest slice or wedge represents the level of bore erosion. Bores were measured from 6.46 to 6.59mm and refer to the diameter of the bore. Increments are very nearly spaced .0004″ apart, or 4 ten-thousandths of an inch.

The second biggest wedge represents how much to adjust the gun based on the M94 and M41 Swedish Mauser 1896 M96 cartridges. “Torped” refers to the boat-tail 139gr m/41 bullet. “Overslag” refers to over shooting, and the “str” is abbreviated for streck. There are 6300 streck in a circle. One streck equals .1m at 100 meters. This is really an indication of how high a bullet will strike the target in relation to point-of-aim.

DoreenM96 Swedish Mauser Serial Numbers

The last or smallest slice indicates what condition the rifle bore is. The lower the number the better the bore is. This is rated 0-4. A rating of 0 means that the bore is almost new and a rating of 4 means the barrel should be replaced. A rating of 0 means there are no triangle stamps next to above any of the numbers.

A little stamped triangle next to a number in each pie shape indicates deterioration of the gun.

The brass disk shown above is the latest version of the disks. Prior versions didn’t contain as much information and Earlier models contained either two screws or zero screws.

M96 Swedish Mauser Serial Numbers

Swedish Mauser Bayonets

The Swedish Mauser has a rather nifty bayonet that can be attached to the rifle. The bayonets are called Swedish bayonets or Swedish 1896 bayonets. Most of the bayonets were either made by Eskilstuna Jernmanufactur AB (EJ-anchor-AB) beginning around 1899 – 1912. They made 280,000 of which the first 10,000 had 4 digit serial numbers. The 3 digit bayonets numbering went up to 999. Once the sequence hit 999, they started the numbering at 001 again.

Starting around 1913 Carl Gustafs Stads Gevärsfaktori (“Rifle Factory of Carl Gustaf’s town”) (Crown/C) took over production. The early versions had what was known as a flat locking stud and were double edged. These were produced from 1899 – 1904. Around 1905 the design was changed to a conical stud and single edge (One side being dull).

The last rifle to use this bayonet was the M1942 and it went out of service in 1964.

Bayonet Markings

The use of unit markings on the bayonets ended in 1933, so if there are unit marks, that most likely means the bayonet was made before 1933. Unmarked bayonets could have been issued anywhere from 1901-1964.

The normal sequence is a company number; a regiment code; a bayonet/weapon number. Regiment codes follow a set pattern with an ‘I’ for Infantry followed by the regiment number, and a ‘K’ for cavalry, followed by cavalry regiment number.

Each bayonet and scabbard had either a 3 or 4 digit (early version) serial number that corresponds to the Swedish M96 rifle serial number that the bayonet was issued with.

If you can find the earlier version of the Swedish bayonet with the Flat Stud or the 4 digit serial number it is worth more. As with all bayonets, finding matching number hilts and scabbards always makes them worth a little more. The bayonet itself is rather unique since it was made entirely from metal with a hollow tube shaped handle. The overall length is 335mm and the blade is 210mm. Typical prices range from $40-$80 and really is a great deal considering how well these are made.

M96 Swedish Mauser Serial Numbers 22

Now of course with many antiques, countries like China, they are always producing fakes.

Swedish Bayonet Recap

1899 – 1912 – Bayonets made by Eskilstuna Jernmanufactur AB (EJ-anchor-AB)
1913 – 1964 Bayonets made by Carl Gustafs Stads Gevärsfaktori (“Rifle Factory of Carl Gustaf’s town”) (Crown/C)
Pre – 1933 – Bayonets with unit markings
1901 – 1964 – May not have unit markings

When searching for the bayonet, use the following search terms “Swedish Bayonet”, “Swede Bayonet”, “1896 Bayonet”, “M96 Bayonet”

Here is another reference website http://www.holmback.se/bayonets/Notes/SwedStamps.html

Search Terms People Used To Find This Article

M96 Swedish Mauser Serial Numbers 222

  • swedish mauser
  • yhs-fullyhosted_003
  • m96 swedish mauser
  • Swedish Mauser for Sale
  • swedish mauser m96
  • Swedish Mauser Rifles for Sale
  • m96 swedish mauser for sale
  • mauser m96
  • 1896 swedish mauser
  • m96 mauser